[CanadienFR]

Please Help I have a problem tunngle will not start it tells me is the error message (4-101 Error: Could not find the Tunngle network adapter!) I try to restart and reinstall but without success problem persists if you can help her would be nice.



I'm on Windows 7
I also note that the CMD window closes more quickly than usual so I decide if its photographier.sorry ecri in French.

2009-12-30 15:21:05 :*** START

2009-12-30 15:21:05 :Win32Platform 2
2009-12-30 15:21:05 :Win32MajorVersion 6
2009-12-30 15:21:05 :Win32MinorVersion 1
2009-12-30 15:21:05 :Win32BuildNumber  7600
2009-12-30 15:21:05 :Win32CSDVersion   

2009-12-30 15:21:05 :64bit
2009-12-30 15:21:05 :*** analysing... (64bit)

2009-12-30 15:21:05 :'c:program' n'est pas reconnu en tant que commande interne
2009-12-30 15:21:05 :ou externe, un programme ex‚cutable ou un fichier de commandes.
2009-12-30 15:21:05 :Devices Found: 0
2009-12-30 15:21:05 :*** installing new adapter...

2009-12-30 15:21:05 :'c:program' n'est pas reconnu en tant que commande interne
2009-12-30 15:21:05 :ou externe, un programme ex‚cutable ou un fichier de commandes.
2009-12-30 15:21:05 :Status: 0
2009-12-30 15:21:06 :completed
2009-12-30 15:21:07 :*** START

2009-12-30 15:21:07 :Win32Platform 2
2009-12-30 15:21:07 :Win32MajorVersion 6
2009-12-30 15:21:07 :Win32MinorVersion 1
2009-12-30 15:21:07 :Win32BuildNumber  7600
2009-12-30 15:21:07 :Win32CSDVersion   

2009-12-30 15:21:07 :64bit
2009-12-30 15:21:07 :StartThem_ TunngleService
2009-12-30 15:21:07 :_Service, saStart
2009-12-30 15:21:08 :StartThem_ END
2009-12-30 15:21:08 :*** Serviceaction

2009-12-30 15:22:05 :*** START

2009-12-30 15:22:05 :Win32Platform 2
2009-12-30 15:22:05 :Win32MajorVersion 6
2009-12-30 15:22:05 :Win32MinorVersion 1
2009-12-30 15:22:05 :Win32BuildNumber  7600
2009-12-30 15:22:05 :Win32CSDVersion   

2009-12-30 15:22:05 :64bit
2009-12-30 15:22:05 :HALT unknown adapter parameter

[Brioche]

Hi . Did you turn automatic short file name generation off (manually or using some windows tweaking tool)?

In case try enabling them back for the time of the setup.

To do this click Start, click Run, type regedit, and then click OK.

Click HKEY_LOCAL_ MACHINE.
Go to SYSTEMCurrentControlSetControlFileSystem folder.
Double-click the NtfsDisable8dot3NameCreation value, type the number 0 in the Data box, and then click OK.
On 7 try the number 2 instead of 0.
Quit Registry Editor, and then restart the computer.

Try again the setup. Please report back .

We should fix this in the next version .
Edit: Post updated.

[CanadienFR]

That not work for my

[Brioche]

Hi . Try to install to c:Tunngle. Next version should fix this issue .
Edit: what was the original value of the reg key?

[CanadienFR]

Yes That work