[Brioche]

Let's suppose that you have two pc connected to the internet one of which (A) shares the Internet connection via Microsoft ICS with the second one (.
Sometimes in this configuration you might need to set a port forward for Tunngle in order to use Tunngle at the same time on the two pcs (or just to use Tunngle on B if you have troubles seeing people in a network).

To do this go to computer B (the ICS client)->Tunngle->System ->Options and choose a different port for forwarding (everything except 11156 and 11155). A good one could be 11160.
Ensure that port forwarding is checked and that upnp is unchecked, then click ok and close Tunngle.

Now go to computer A (the ICS server) and open the control panel.
In the control panel choose Network Connections, then right click on the Internet connection (which is the connection shared over ICS) and select properties.
In the Advanced tab, click Settings (not the firewall one but the Internet Connection Sharing one).
In the Services box, click ADD.

Fill in as follows:
Description: Tunngle
Name or IP: B IP over the connection selected for sharing (most likely it will be something like 192.168.0.x). You need to find this in the connection details on computer B.
Protocol: UDP
External Port number for this service: 11160 (this must be the port you choose above in the Tunngle options for computer
Internal Port number for this service: same as external
Click OK to complete the configuration, ensure that the Tunngle checkbox is checked, and then click OK to exit the Advanced Settings dialog box.
Now you can try to fire up Tunngle again on computer B.

If you are running Tunngle from a Microsoft Internet Connection Sharing server and your clients can't browse the internet you need to manually set the DNS for each client. You can use Open DNS (Primary: 208.67.222.222 Alternative: 208.67.220.220).
To do this open the Network Connections page on your Client Computers, right-click the adapter that you use to access the internet connection, select properties, select "Internet Protocol Version 4" from the list, click properties, select use the following DNS, type in the two numbers above, click ok a couple of times and you are done.


I hope this helps .

Attached File(s)

•  image.jpg (35.02K)
  Number of downloads: 189